SLHBN Series LED Flood light

■Matters needing attention

■Before installing the lighting fixtures, please read this instruction manual carefully.

■The lighting fixtures should be installed, connected and tested by a certified electrician based on the local regulations.

■Lamps should always be installed or replaced carefully.

■Please check the local voltage in accordance with the product requirements before installation.

■Revamping only can be done when the power is off and the lamp is completely cooled down.

■When clean the lamp, make the power off and let it cool down completely, clean the fixture with a soft cloth and a standard PH neutral detergent, stainless steel should be maintained regularly.

■Don't cover the fixtures with flammable materials.

■Replace should be made by the manufacturer or his service agent or certified electrician in order to avoid a hazard.

■Temperature Characteristics T-ambient 25℃

Temperature

Operating -20~+45℃

Storage -40~+60℃

■Electrical Characteristics

Input Voltage:AC220-240V / AC100-240V

50/60Hz

Power Efficiency:≧0.90

1.Features

■IP65 waterproof/dust proof/explosion proof/IK07

■One-piece die-casting to help dissipate heat

■Super tough tempered glass, light transmittance greater than 90% Easy replacement and installation

■SMD 2835 Ra>70/SDCM<6

■50,000 times switching cycle before failure

■Total harmonic distortion(THD)<20%

2.Application

INDUSTRIAL LIGHTING

Manufacture Warehouses

Parking lots

Exhibition centers

Gas stations

Toll stations etc.

3.Product Dimension

4.Parameter

AC 220-240V （Linear scheme ）

AC 220-240V （Linear scheme ERP EMC ）

AC 100-240V （DOB PF0.9 ）

5.Light distribution curve selection

ways of Installation

8.Packaging

Packing Data

9.Attention

This specification is for reference only,we reserve the right to change without notice.